Filter
Top Products
52 en | Maintenance RPS
4998141259 | 12 | 2011.10 Installation Guide Bosch Security Systems, Inc.
6.2 Modify, Repair, or Remove RPS
6.2.1 Modify RPS
To install other features that were not initially installed, such as Unattended Operation, or
remove currently installed features:
1. Select Start > Settings > Control Panel > Add/Remove Programs. The Add/Remove
Programs dialog opens.
2. Scroll down the list until you see RPS. Click RPS to select it.
3. Click Change. The RPS Setup Maintenance dialog opens.
4. Click Modify, and then click Next. The Select Features dialog opens.
NOTICE!
To modify the current RPS installation, you must use the original installation files.
– If RPS was installed from the CD-ROM, you must use the CD-ROM.
– If RPS was installed from a folder containing the installation files, you must use the same
folder in the location it resided at when RPS was installed.