Filter
Top Products
Application Note
BlueBox Demo-Board for the digital sensors
SMB365 (acceleration) and SMD500 (pressure)
Bosch Sensortec
AN18002
Rev. 1.0
Page 17
© Bosch Sensortec GmbH reserves all ri
g
hts even in the event of industrial propert
y
ri
g
hts. We reserve all ri
g
hts of disposal such
cop
y
in
g
and passin
g
onto third parties.
7211RB11.
3 Quick-Start
Note: It is strongly recommended that the BST Sensor Desktop software is already installed on
your PC before continuing with the following chapters.
3.1 USB wire bound
1. Turn on the BlueBox demo board (Main Switch into the direction of the USB connector)
o The demo board performs a self test indicated as a LED light up sequence
o LEDs in general from left to right:
- outer red: (flashes) battery warning
- yellow: (constant) continuous data transmission
- green: (constant) logic COM port connection
- yellow: (alternately flashes with green LED) searching COM port
- inner red: (constant) recharging battery
2. Connect the BlueBox to a free USB-Port on your PC
o the red LED on the board indicates: “recharging battery pack”, used for optional
wireless operation, the green LED indicates “logic connection to COM port O.K.”
3. Execute the SensorDesktop software on the PC from Start\Programs\ SensorDesktop
Main Switch
USB connector
LEDs