Bosch Appliances UML-151-90 Computer Monitor User Manual


 
12 en | Remote Control General Purpose LCD Monitors
F.01U.127.338 | 2.0 | 2009.05 User’s Manual Bosch Security Systems, Inc.
4 Remote Control
This section details the functions and the usage of the Bosch remote control.
4.1 Remote Control Battery Installation
1. Turn the remote over (buttons facing down) and push down on the cover and slide it off.
2. Insert two (2) new AAA alkaline batteries, matching the batteries to the (+) and (-) marks
inside the battery case.
Figure 4.1 Remote Control Battery Placement
3. Slide the battery cover back into place.
Note: Replace batteries when required or at least once a year. Dispose of used batteries
properly.
Button Function
POWER Turns the power ON and OFF.
SOURCE Selects the PC or Video source.
APC (Auto
Picture Control)
Selects the Picture mode. Continuously press this button
to change the selection.
ACC (Auto Color
Control)
Selects the Color mode. Continuously press this button
to change the selection.
AV1 Selects the AV1 mode. Press this button to display AV1.
AV2 Selects the AV2 mode. Press this button to display AV2.
S-VIDEO Selects the S-VIDEO mode. Press this button to display
S-VIDEO.
PC Selects the PC mode. Press this button to display PC.
AUTO Auto adjusts to the graphics adaptor.
MUTE Mutes the sound.
MENU Displays the OSD. Pressing the Menu button returns you
to the Main menu from anywhere in the OSD menus.
EXIT Exits the OSD.
UP Moves the cursor up in an OSD menu.
DOWN Moves the cursor down in an OSD menu.
ENTER Accepts your selection or displays the current mode
when in the OSD menu.
VOL
Moves the cursor left, decreases item values in an OSD
menu, or decreases volume.
VOL
Moves the cursor right, increases item values in an OSD
menu, or decreases volume.
INFO Displays the information for the settings currently
selected for CVBS or PC Input.
STILL Freezes the video by pressing the button once and
releases the freeze by pushing it again.