Filter
Top Products
14 en | Installing the Monitor General Purpose LCD Monitors
F.01U.127.338 | 2.0 | 2009.05 User’s Manual Bosch Security Systems, Inc.
6.2 Mounting the Monitor
The UML-151-90, UML-171-90, and the UML-191-90 are designed for use on a desktop or
mounted to a wall or rack.
6.2.1 Desktop Installation
The Bosch General Purpose monitors are delivered with a 3-pole US-style power cord and a 3-
pole Euro-style power cord. Use the US-style power cord where 120 VAC, 60 Hz power is
available; use the Euro-style power cord where 230 VAC, 50 Hz power is available. The
monitor automatically adjusts to either power input voltage.
6.2.2 Wall Mount Installation
The square mounting holes (100 mm [3.9 in.] centers) are compatible with the Bosch UMM-
LW-20B fixed wall mount or the UMM-LW-30B swivel/tilt. To install the wall mount, do the
following:
1. Remove the base from the LCD panel section by unscrewing the four (4) holding screws
before separating the base from the panel.
Figure 6.1 Removing the Base