Filter
Top Products
22
Using the Projector
Using the Keypad and Remote Buttons
The keypad is lit orange when the projector is on and lit green
while the menus are displayed. While the menus are displayed,
the volume, source, and standby buttons act as navigation but-
tons. See “Using the On-Screen Menus” on page 24 for details.
FIGURE 16
Keypad
Menu
Press
menu
to open the on-screen menus (the keypad lights
green). Press
menu
again to close the menus. When you close the
menus, the projector saves any changes you made. For more
information about the on-screen menus, see page 24.
Mouse buttons
Use the left and right mouse buttons to make selections and
adjustments in the menus. See “Using the On-Screen Menus” on
page 24 for details.
Source (keypad only) or Computer and Video (remote only)
When you have more than one source (computer and video) con-
nected to the projector, select between them by pressing the
source button on the keypad or the Computer or Video button on
the remote.
power LED
left/right mouse buttons