Filter
Top Products
19
Standby
When you press
standby
, the display and audio turn off and a
blank screen is displayed for 15 minutes. You can change the
amount of time the projector stays in standby mode; see
“Standby Time” on page 27 for details. The LED lights orange
while the projector is in standby.
•
If you press
standby
again within 15 minutes, the projector
returns to normal operations immediately. The LED changes
from orange to green.
•
If you press
standby
again after 15 minutes, there is about a
60 second delay before the lamp turns back on. The LED
flashes green while the lamp is re-lighting.
•
If you don’t press
standby
again, the lamp turns off after 15
minutes. The LED lights orange while the projector is in
standby.
Volume (keypad only)
To increase the volume, press
volume + .
To decrease the vol-
ume, press
volume -
.
Volume adjustments are saved for each source you have con-
nected.