Filter
Top Products
30
Using the Projector
Status Menu
This is a read-only window for informational purposes. To dis-
play the status window, select Show status from the menu, then
click the left or right mouse button. To remove the window, click
the left or right mouse button.
FIGURE 19
Status menu
Lamp hours used
Indicates how many hours the current lamp has been in use. The
counter starts at zero hours and counts each hour the lamp is in
use. After 2,000 hours of use, the message “Change Lamp” tem-
porarily appears on the screen when the projector is turned on.
Change the lamp within the next 50 hours. After 2,050 hours, the
LED flashes orange and the lamp will not light. See “Replacing
the Projection Lamp” on page 33 for details.
Computer resolution
Shows your computer’s resolution setting. To change this, go to
your computer’s Control Panel and adjust the resolution in the
Display tab. See your computer’s user’s guide for details.
Horizontal refresh rate
The time period that one horizontal line is displayed.
Display Audio Image Controls Language Status
Show status
Lamp hours used
Computer resolution
Horizontal refresh rate
Vertical refresh rate
Mute status
Source
Software version
Startup screen version
Boot version
CablePro version 1.0
0039
1024x768
60.03 KHz
75.04 Hz
off
computer 1 analog
1.0
1.0
1.0
>