Filter
Top Products
40
Maintenance & Troubleshooting
Problem: Lamp shuts off
•
A minor power surge may cause the lamp to shut off. Unplug
the projector, wait at least a minute, then plug it back in.
•
Make sure the vents are not blocked.
•
Make sure the lamp has not been in use for over 2,050 hours.
The lamp automatically shuts off at 2,050 hours. See “Replac-
ing the Projection Lamp” on page 33.
Before calling B
OXLIGHT
for assistance, please have the following
information available:
•
the projector’s serial number (located on the bottom label)
•
the resolution of your computer.
Call B
OXLIGHT
at
1-800-762-5757
or
360-779-7901
.