Filter
Top Products
19
ENGLISH
1. Input / output signal
Connection to the RGB signal terminal
2. Signal input / output terminal
51
10
6
15
11
D-sub 15pin shrink terminal
(Female)
1. Input signal
Connection to the video signal terminals
2. Signal input terminal
Ground
Luminance signal
S VIDEO input (Mini DIN4 pin)
Ground
Chrominance signal
Caution
Video input signal terminals have priority in the following order.
S-VIDEO input terminal RCA jack input terminal
Even when the video signal is displayed, only an audio signal is output to RGB audio output terminals.
2
1
Caution
Do not use RGB cable other than that specified.
Some RGB cable may not operate DDC (Display Data Channel)
because there are not connect from pin NO. to pin NO. .
12
15
S-VIDEO signal
Luminance signal 1.0Vp-p, 75Ω termination
Chrominance signal 0.286Vp-p (burst signal), 75Ω termination
VIDEO signal
1.0Vp-p, 75Ω termination
AUDIO signal
Input
200mVrms, 20kΩ below (MAX 3.0Vp-p)
Output
0~200mVrms, 1kΩ
Video signal
Analog 0.7Vp-p 75Ω termination (Positive polarity)
Horizontal sync signal TTL level (Positive/negative polarity)
Vertical sync signal TTL level (Positive/negative polarity)
Composite sync signal TTL level
Audio signal
Input
200mVrms, 20kΩ below (MAX 3.0Vp-p)
Output
0~200mVrms, 1kΩ
1 Video signal (Red)
2 Video signal (Green)
3 Video signal (Blue)
4 N.C
5 N.C
6 Ground (for R)
7 Ground (for G)
8 Ground (for B)
9 N.C
10 Ground
11 N.C
12
DDC (Display Data channel) RGB1 only
13 Horizontal/Composite sync signal
14
Vertical sync signal
15
DDC (Display Data channel) RGB1 only