Filter
Top Products
7
ENGLISH
Main unit
Lens
Speaker
Speaker
Remote control
sensor
• Use the remote control transmitter within the range
of about 16 feet from the remote control sensor and
within 30° to both the left and right.
Cooling fan
(exhaust)
Contents of shipping box
Handle
STANDBY / ON button
Power ON/OFF button.
OFF sets the unit in standby mode.
(see page 12~13)
LAMP indicator
This lights or blinks when the lamp does
not light. (See page 31)
TEMP indicator
This lights or blinks when temperature
inside the projector is too high or when fan
is abnormal.(See page 31)
INPUT button
To select the input source.
Each time this button is pressed, the input
source is changed in sequence as shown
below.(See page 12)
ZOOM knob
Adjusts picture size.
(See page 12)
FOCUS ring
Adjusts focus. (See page 12)
MENU button
Picture adjustments.
Refer to page 15~18 for details.
RESET button
Resets unit to factory settings.
(See page 15)
Lens cap
MUTE button
Silences the sound. (Cancels the mute
when the unit is set in mute mode.)
RGB1
RGB2 VIDEO
Names and functions of each part
ON indicator
This blinks in the standby mode and lights
in the operation mode.(See page 31)
Power Cord
110V - US
3-Conductor
Video/Audio Cable
Liquid Crystal Projector Operating GuideRemote Control Transmitter
(batteries included)
RGB Cable
(15-15 pin M/M)
Mac adapter
with dip switch
Mouse cable 3
STANDBY/ON MUTE
POSITION ON
OFF
LASER
RESET
MOUSE ON
BLANK TIMER
RGB VIDEO
INPUT
MENU ON
RIGHT
VOLUME
MAGNIFY
FREEZE
ON
OFF
123456
MP-93i
Liquid Crystal Projector
OPERATING GUIDE
Flüssigkristall-Projektor
BEDIENUNGSANLEITUNG
Vidéoprojecteur à cristaux liquidis
NOTICE D'UTILISATION
Proiettore A Cristalli Liquidi
LIBRETTO D'ISTRUZIONI
Proyector con paneles de cristal líquido
MANUAL DE INSTRUCCIONES
Vloeibare-kristallen Projektor
GEBRUIKSAANWIJZING
Flytende krystall prosjektør
BRUKERHÅNDBOK
ENGLISH
DEUTSCHFRANÇAISITALIANOESPAÑOL
NEDERLANDS
NORSK
Check that the carton contains the following items.
RESET
MENU
MUTE
INPUT
LAMP
TEMP
STANDBY/ON
Cooling fan
(in take)