Filter
Top Products
Getting Started
Before You Begin
34
Y885775 BradyConnect 10/100 Internal Print Server User Guide 07/18/2008
Before You Begin
10/100 Internal PS offers many features, but how you access and work with them is dependent
on your environment. Before you begin, you need to get information from the 10/100 Internal
PS configuration label.
Table 5 shows the minimum label widths needed to print a 10/100 Internal PS configuration
label with different DPI printheads.
To print a network configuration label for BBP81 (4”) and BBP81 (6”) printers
with a 10/100 Internal PS, complete these steps:
1. Turn on (I) the printer and let it complete its power-up cycle.
2. When the POST cycle is complete, press Setup/Exit to enter the Setup Mode.
3. Scroll through the parameters using the Plus (+ key) until you reach List Network.
4. Press Select to access List Network. Print+ displays.
5. Press Plus (+ key) to print the network configuration label.
Important • Make sure the printer is turned off (O).
Table 5 • Label Width
DPI Inches MM
300 2.50 63.50