Filter
Top Products
Hardware Troubleshooting
Troubleshooting the 10/100 PS
82
Y885775 BradyConnect 10/100 Internal Print Server User Guide 07/18/2008
Troubleshooting the 10/100 PS
Defaulting the 10/100 PS on the BBP81 (4”) and BBP81 (6”) Printers
To default the 10/100 Internal PS to factory settings using the control panel,
complete these steps:
1. From the control panel, press Setup/Exit two times.
2. Press Plus (+ key) five times.
The control panel will read DEFAULT NET.
3. Press Setup/Exit to save the change.
4. After the printer defaults all settings, the control panel will show PRINTER READY.
Note • Only the BBP81 (4”) and BBP81 (6”) printers have a control panel.