Filter
Top Products
22 Brocade 6910 Ethernet Access Switch MIB Reference
53-1002582-01
Common objects
General chassis
Power supply table
Temperature
Refer to the chapter “Traps and Objects to Enable Traps” on page 57 for objects dealing with traps.
snChasUnitPartNum
brcdIp. 1.1.1.4.1.1.7
Syntax: DisplayString
Read only The part number of the chassis for each unit. If the part
number is unknown or unavailable then the value should be a
zero length string.
snChasUnitActualTemperature
brcdIp.1.1.1.4.1.1.4
Syntax: Integer
Read only Shows the average of all sensors in the current unit. Each unit
is 0.5 degrees Celsius.
Values are from -110 to 250.
Name, Identifier, and Syntax Access Description
snChasSerNum
brcdIp.1.1.1.1.2
Syntax: DisplayString
Read only The serial number of the chassis. If the serial number is unknown
or unavailable thenthe value should be a zero length string.
This object can have up to 128 characters.
snChasNumSlots
brcdIp.1.1.1.1.24
Syntax: Integer32
Read only Shows the maximum number of units in a stack.
Name, Identifier, and Syntax Access Description
snChasPwrSupply2Table
brcdIp.1.1.1.2.2
N/A A table containing power supply information. Only installed power
supplies appear in the table.
snChasPwrSupply2Entry
brcdIp.1.1.1.2.2.1
N/A A row in the power supply table. One row appears for each power
supply.
snChasPwrSupply2Unit
brcdIp.1.1.1.2.2.1.1
Read only The index to power supply table.
snChasPwrSupply2Index
brcdIp.1.1.1.2.2.1.2
Syntax: Integer32
Read only The index to power supply table.
snChasPwrSupplyOperStatus
brcdIp.1.1.1.2.2.1.4
Syntax: Integer
Read only Shows the status of the power supply:
• other(1) – Status is neither normal(2) or failure(3).
• normal(2)
• failure(3)
Name, Identifier, and Syntax Access Description
snChasActualTemperature
brcdIp.1.1.1.1.18
Syntax: Integer
Read only Shows the average temperature of all sensors in all units. Each
unit is 0.5 degrees Celsius.
Values are from -110 – 250
NOTE: For per-unit (per thermal sensor), see
UnitActualTemperature and snAgentTemp2Value instead.
Name, Identifier, and Syntax Access Description