Filter
Top Products
Brocade 6910 Ethernet Access Switch MIB Reference 61
53-1002582-01
IronWare traps
Port security traps
The Port Security feature enables a device to learn a limited number of “secure” MAC addresses on
an interface. The interface will forward only those packets with source MAC addresses that match
these secure addresses. If the interface receives MAC addresses that are included in its secure
MAC list, the device generates the following traps:
NOTE
These traps appy to ports that have the Port Security feature enabled.
Traps for stacking
Brocade supports for the following traps for stacking.
snTrapSysMemoryLowThreshold
brcdIp.0.180
snAgGblTrapMessage Informational The SNMP trap that is generated
when memory utilization reaches the
memory rising threshold (set by the
CLI memory command).
snTrapTemperatureOK
brcdIp.0.1001
snAgGblTrapMessage Informational The SNMP trap that is generated
when the actual temperature reading
falls from the rising threshold and
reaches the falling threshold.
Sample Trap Message:
System: Stack unit
<unitNumber> temperature
<actual-temp> C degrees is
normal
Trap Name and Number Varbind Severity Description
snTrapPortSecurityViolation
brcdIp.0.77
snAgGblTrapMessage Minor The SNMP trap that is generated
when insecure MAC addressesare
received from a port with MAC
security feature enabled.
Sample Trap Message:
Brocade Trap: Port
Security Violation
Trap Name and Number Varbind Severity Description
snTrapStackingChasPwrSupplyOK
brcdIp.0.166
snChasUnitIndex,
snChasPwrSupplyIndex,
snAgGblTrapMessage
Minor The SNMP trap that is generated
when a power supply operational
status changed from failure to
normal for a stacking system.
Sample Trap Message
System: Stack unit
<unitNumber>
Power supply
<snChasPwrSupplyIndex> is
up
Trap Name and Number Varbind Severity Description