Brother FAX-1020E Fax Machine User Manual


 
PREPARATION
AND SIMPLE USE
Preparation and Simple Use Guide 3
6 Making a Single Copy
Insert the document face down in the ADF.
Press Copy.
Press Copy. (See Making Copies, page 29.)
To cancel, press Stop/Exit.
Your machine cannot scan anything closer than 4 mm from the edge of the paper.
Do NOT pull the paper while copying is in progress.
7 Setting up the Answer phone (TAD)
Press Menu/Set, 8, 1. The screen prompts you to choose a DOC (Document) setting.
Press or to select ON (or OFF), and press Menu/Set.
The screen prompts you to choose a VOICE setting.
Press or to select your setting from the list (ON, OFF or EXT), and press
Menu/Set when the screen displays your selection.
Press Stop/Exit.
Press Menu/Set, 8, 3. The screen prompts you to choose an OGM.
Press or to reach TAD MESSAGE.
This is the only setting you can select if you want to turn the Message Manager on.
Press Menu/Set.
Press or to select RECORD MSG and press Menu/Set.
Pick up the handset to record a message.
For example: Hello. We are unable to take your call at this time. Please leave a message after
the tone. If you wish to send a fax, please press 5 1, wait for the fax tones, then press the
start button on your machine. (See Recording the Message Manager’s Outgoing Message
(TAD MESSAGE), page 61.)
Replace the handset. The Message Manager plays your OGM.
Press Stop/Exit.
Activate Message Manager (TAD) Mode by pressing .
1
2
3
1
2
3
4
5
6
7
8
9
10
11
12