Filter
Top Products
UNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE OPC CARTRIDGE
11124 Washington Blvd., Culver City, California U.S.A. 90232 Ph: 310 280-9620 • Fx: 310 838-7294 • sales@uninetimaging.com
© 2005 Uninet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. Uninet Imaging does not guarantee or warrant downloaded information.
USA
+1-310-280-9620
+1-310-838-7294
Ph:
Fx:
JAPAN
+81-3-44-55-2789
+1-310-838-7294
EUROPE
+34-93-757-1335
+34-93-741-4166
BRAZIL
+55-11-4822-3033
+55-11-4822-3353
ARGENTINA
+54-11-4571-2388
+54-11-4574-3706
www.uninetimaging.com
13. Extract the transfer roller from the car-
tridge using a pair of long nose pliers. Notice
that the saddles and the helical gear will also
come out. Clean the roller with compressed air
or vacuum cleaner. DO NOT USE any solvent or
chemicals on the transference roller.
12. NOTE: There is also a plastic stabilizer
bearing for the axle located on the same side
of the clutch gear which must be secured.
NOTES