Filter
Top Products
UNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE TONER CARTRIDGE
11124 Washington Blvd., Culver City, California U.S.A. 90232 Ph: 310 280-9620 • Fx: 310 838-7294 • sales@uninetimaging.com
© 2005 Uninet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. Uninet Imaging does not guarantee or warrant downloaded information.
USA
+1-310-280-9620
+1-310-838-7294
Ph:
Fx:
JAPAN
+81-3-44-55-2789
+1-310-838-7294
EUROPE
+34-93-757-1335
+34-93-741-4166
BRAZIL
+55-11-4822-3033
+55-11-4822-3353
ARGENTINA
+54-11-4571-2388
+54-11-4574-3706
www.uninetimaging.com
4. With a small flat blade screwdriver, pry the
bearing cap off the developer roller axle and
the fixing post.
6. Press the clip in towards the developer roller and rotate the piece up towards the front of the
toner hopper, until the bearing cap is perpendicular to the roller.
5. Move to the other side of the cartridge and
above the white plastic hub on the gear side,
locate the clip that holds the developer roller
cap-bearing. NOTE: Contrary to the other bear-
ing cap this one is located between the devel-
oper roller and the side of the cartridge.