Filter
Top Products
18
Inserting a Tape Cassette
GETTING STARTED
Tape cassettes of
3.5mm, 6mm, 9mm, 12mm, 18mm, or 24mm
width can be used in
your P-touch. Use only Brother tape cassettes with the
mark.
Check that the end of the tape is not bent and
that it passes through the tape guide. If the
tape is not passed through, pass it through
the tape guide referring to the illustration.
After making sure that the power is off, lift open the
tape compartment cover. If there is already a tape
cassette in the machine, remove it by pulling it
straight up.
Inserting a Tape Cassette
• If the new tape cassette has a cardboard stopper, be sure to
remove the stopper before inserting the cassette.
• If the ink ribbon is loose, use your finger to wind the toothed
wheel in the direction of the arrow as shown on the tape cassette.
End of tape
Tape guide
1
2