Filter
Top Products
18
SETTING ADMINISTRATOR PRIVILEGES
If installation or calibration is not working on your Macintosh system, the solution
may be in the privileges. When initially set up, you are given administrator
privileges which should allow you to install the DSmobile software and complete
the calibration. If, however, your system is set up such that you do not have
administrator privileges or the privileges have somehow become corrupt, the
installation and calibration may not be possible. To correct this problem, do the
following:
1. Mouse over the Apple in the upper left corner of the desktop and select System
Preferences.
2. Select System and then Accounts.
3. The left pane of the window will list the current accounts, one of which should
be your user name with the word “Admin” underneath.
4. If this is not the case, contact your system administrator to have the privileges
changed so you can install software and calibrate the scanner.
UN-INSTALLING SOFTWARE
If you need to remove any of this software from your Macintosh system, you may
either use the original installation disk and choose “Uninstall” or you can drag the
software out of the Applications folder to the trash can.
INSTALLING HARDWARE
Installing hardware is as simple as finding an unused USB port on your Macintosh
and inserting the scanner cable’s USB plug into the socket.