Filter
Top Products
50
10
Scanning a document 10
There are several ways to scan documents.
You can use the (SCAN) key on the
machine or the scanner drivers on your
computer.
a To use the machine as a scanner, install
a scanner driver. If the machine is on a
Network, configure it with a TCP/IP
address.
Install the scanner drivers on the
Installation CD-ROM. (See the Quick
Setup Guide and Scanning in the
Software User’s Guide.)
(Network models only) Configure the
machine with a TCP/IP address if
network scanning does not work.
(See Configuring Network Scanning
in the Software User’s Guide.)
b Load your document. (See How to load
documents on page 22.)
Use the ADF to scan multiple pages
of documents. It feeds each sheet
automatically.
Use the scanner glass to scan a
page of a book or one sheet at a
time.
c Do one of the following:
To scan using the (SCAN)
key, go to Scanning using the scan
key on page 50.
To scan using a scanner driver at
your computer, go to Scanning using
a scanner driver on page 51.
Scanning using the
scan key 10
For more information, see Using the Scan
key in the Software User’s Guide.
a Press the (SCAN) key.
b Choose the scan mode you want.
Scan to:
File
E-mail
OCR
1
Image
FTP
2
1
(Macintosh users)
This function is available after you download
and install Presto! PageManager from
http://nj.newsoft.com.tw/download/brother/
PM9SEInstaller_BR_multilang.dmg
2
For MFC-7460DN and MFC-7860DW
c (Network models only) Choose the
computer you want to send the data to.
d Press Start to begin scanning.
How to scan to a computer 10