Filter
Top Products
6 - 9 TROUBLESHOOTING
5
Open the face-up output tray. Pull the jammed paper out of the fuser unit. If the paper jam can be
cleared, go to Step 7.
Figure 6-8
Caution
After you have just used the printer, some internal parts of the printer are extremely hot! Wait for the
printer to cool down before you touch the internal parts of the printer.
Figure 6-9
6
Open the jam clear cover. Pull the jammed paper out of the fuser unit.
Figure 6-10
7
Close the jam clear cover. Close the face-up output tray. If the paper jam still cannot be cleared,
for HL-5130 and HL-5140 users go to Step 10, and for all other users go to the next step.
If you have to pull the paper toward the back of the printer, the fuser may get dirty with toner powder
and it may scatter on the next few printouts. Print a few copies of the test page until the scattering
of toner stops.