Filter
Top Products
6
Setting Up Your Printer
Do NOT connect the interface cable.
Connecting the Interface cable is
done when installing the driver.
1 Remove the protective part from the paper
exit of the printer.
2 Open the multi-purpose tray and lower it gently.
3 Remove the protective part from in the
multi-purpose tray.
4 Close the multi-purpose tray.
1 Open the top cover of the printer.
2 Unpack the drum unit assembly.
Remove the protective part.
3 Rock it from side to side several times to
distribute the toner evenly inside the
assembly.
4 Put the drum unit assembly into the printer.
5 Close the top cover of the printer.
1
Remove the Protective
Parts
Paper exit
Protective part
Multi-purpose
tray
Protective part
2
Install the Drum Unit
Assembly
Top cover
Drum unit
assembly
Protective part
Step 1