Filter
Top Products
ON-SCREEN PROGRAMMING
3 - 2
T7BASE-US-FM5.5
Function Selection Table
If you have a basic understanding of how to program your fax machine, you can
perform most of the programming settings without the Owner’s Manual. To help you
understand the function selections, options, and settings that are found in your fax
programs, use the Function Selection Table below.
1. INITIAL SETUP
Function Description Factory Set More Info
1. DATE/TIME
Enter date and time for LCD
display and to print on
transmissions.
— 4-1
2. STATION ID
Program name, fax number and
telephone number to appear on
each transmitted page.
— 4-1
3. BEEPER
Adjust volume level of beeper. LOW 4-4
4. VOLUME AMPLIFY
For the hearing-impaired, you
can set the volume to the VOL
AMPLIFY:ON setting on a
permanent or temporary basis.
OFF 4-5
5. TONE/PULSE
(For Canada Only)
Selects dialing mode. TONE 4-2
6. LOCAL
LANGUAGE
(For Canada Only)
Allows you to change the LCD
Language to French.
ENGLISH See French
manual
2. SETUP RECEIVE
Function Description Factory Set More Info
1. RING DELAY
Number of rings before fax
machine answers in FAX/TEL
or FAX mode.
04 5-2
2. F/T RING TIME
Sets the time for “double ring”
in FAX/TEL mode.
20 5-3
3. EASY RECEIVE
Receive fax messages without
pressing the Start key.
ON 5-3
4. REMOTE CODE
Enter code to activate or
deactivate machine from a
remote location.
ON
( 51, #51)
5-5
5. REDUCTION
Reduces size of image. AUTO 5-4
6. PAPER
Selects size of paper for fax
receiving.
LETTER 5-4
7. POLLING RX
Sets up your fax machine to poll
another fax machine.
OFF 5-6