Filter
Top Products
SETUP SEND
6 - 3
T7BASE-US-FM5.5
Memory Transmission
This feature allows your machine to scan a fax into its memory and send it as soon as
the scan is complete. This way, you don’t have to wait for the entire fax to be
transmitted before you retrieve your original.
1
Place the original face down in the ADF.
2
Press Function/Set, 3, 9.
3
To change the default setting, press or
to select ON (or OFF) and press
Function/Set.
Go to Step 5—OR—For the next fax
transmission only, press or to select
NEXT FAX ONLY and press Function/Set.
4
For the next fax only, press or to select ON (or OFF) and press Function/Set.
5
Press 1 to select additional settings. The display returns to the SETUP SEND menu
—OR—Press 2 if you are finished choosing settings and go to Step 6.
6
Enter fax number and press Start.
Basic Sending Operations
Contrast
If your original is very light or very dark, you might want to set the contrast
accordingly. Use S.LIGHT to send a very light original. Use S.DARK to send a very
dark original.
1
Place the original face down in the ADF.
2
Press Function/Set, 3, 3.
3
Press or to select AUTO, S.LIGHT or S.DARK and press Function/Set.
4
Press 2 if you are finished choosing settings, and go to Step 5—OR—Press 1 if you
want to select additional settings. The display returns to the Setup Send menu.
5
Enter a fax number and press Start to send a fax—OR—Press Copy/Help to make
a copy.
If you get a MEMORY FULL message while scanning the first page of a fax, press
Stop to cancel the scan. If you get a MEMORY FULL message while scanning in a
subsequent page, you’ll have the option to press Start to transmit the pages scanned
so far, or to press Stop to cancel the operation. In this case, send the fax by the
Manual Transmission.
Depending on your typical faxes, MEMORY FULL errors can occur frequently. If
this happens, change the Memory Transmission setting back to OFF.
9.MEMORY TX
SELECT <- -> & SET
MEMORY TX:ON?