Filter
Top Products
Troubleshooting and Maintenance 73
MAINTENANCE
OUT OF MEMORY
(When the machine is
used as a printer.)
The machine memory capacity has
been exceeded.
- Press Reset to delete data
remaining in the memory of
the machine.
- If you have installed the
Windows
®
driver, try again
after setting the True Type
mode to “Print as Graphics” in
the PRINT menu of your
application software.
- Reduce the print resolution or
reduce the complexity of your
document.
- Expand the printer memory
with the optional memory
board.
OUT OF MEMORY
(When the machine is
used as a copier.)
The machine memory capacity has
been exceeded.
See Out of Memory Message, page
14.
PAPER JAM The recording paper is jammed in the
machine.
See Printer Jam or Paper Jam,
page 74.
PLS CLEAN DRUM The primary corona wire of drum unit
is dirty.
Clean the primary corona wire of
drum unit. (See Cleaning the
Drum Unit, page 83.)
PLS OPEN COVER A page, piece of paper or paper clip,
etc. may be jammed inside the
machine.
Open the front cover and remove
the drum unit. If you see any
jammed paper or other item, gently
pull it out. Reinstall the drum unit,
then close the front cover. If the
error message remains, open and
close the front cover again. If the
machine cannot reset itself and
return to copy status prompt, it will
display MACHINE ERROR XX.
Then contact your Brother dealer
for service.
TONER EMPTY Toner is used up and printing is not
possible, or toner cartridge is not
installed into the drum unit.
Replace the toner cartridge with a
new one, or install the toner
cartridge into the drum unit. (See
Replacing the Toner Cartridge,
page 84.)
ERROR MESSAGE CAUSE ACTION