Filter
Top Products
8
INSTALLING P-TOUCH EDITOR
Installing the P-touch Editor software and printer driver add even more illustration and layout
features to the label-making possibilities available with your PT-2400/2410.
To install P-touch Editor and the printer driver on an IBM PC-compatible computer:
1
Check that your system configuration meets the following requirements.
Computer:
IBM PC or compatible
Operating system:
Microsoft Windows
®
95, 98 or NT 4.0
Hard disk free space:
At least 20 MB
☞
A few hundred megabytes of additional free space may be needed when printing
long labels or large amounts of data.
Monitor:
VGA or higher graphics card
Serial port:
9-pin connector jack
CD-ROM drive
2
Connect the PT-2400/2410 to the computer’s serial port and turn on both the PT-
2400/2410 and the computer.
3
Insert the P-touch Editor CD-ROM into the
computer’s CD-ROM drive.
☞
The installers for the P-touch Editor
program, printer driver and User’s
Guide can also be copied from the CD-
ROM onto floppy disks. Refer to the
Readme file for more details.
4
Click the
Editor button to install the P-touch
Editor software and the PT-2400/2410 printer
driver.
☞
To install only the printer driver, click
the Printer driver button, select the
desired model, and then skip to step
B
.
5 Click the PT-2400/2410 button to start up the
InstallShield
®
Wizard for installing the P-touch
Editor software and the PT-2400/2410 printer
driver.
6 In the Welcome dialog box, click the Next
button.