Filter
Top Products
92
TAPE MARGIN FUNCTION
The Tape margin function allows you to adjust the size of the margins on the left and right
sides of your text.
The default tape margin setting is FULL; however, three other settings are also available.
FULL (1” (25 mm) margins)
NONE (1/6” (4 mm) margins)
NARROW (1/3” (8 mm) margins)
MEDIUM (1/2” (12 mm) margins)
☞
When a setting other than FULL is selected, extra tape is fed out before printing starts.
The extra tape is cut off if the Auto cut function is set to ON so that the margins on each
side of the text are equal.
To change the tape margin setting:
1 While holding down , press once, and keep held down to display the
current tape margin setting.
2 While still holding down , continue pressing until the desired tape margin set-
ting is displayed.
3 Release to apply the selected tape margin setting to the entire text.
EXAMPLE
To select the MEDIUM tape margin setting:
1
While holding down , press
once, and keep held down.
2 While still holding down , con-
tinue pressing until MEDIUM is dis-
played.
3 Release .
CodeCode
Tape
E
Tape
E
CodeCode
CodeCode
Tape
E
Tape
E
CodeCode
FEED
Alt
Caps
FULL
Width
Length
A.Format
Undl/Frm
Length
CodeCode
Tape
E
Tape
E
CodeCode
FEED
Alt
Caps
MEDIUM
Width
Length
A.Format
Undl/Frm
Length
CodeCode
Tape
E
Tape
E
CodeCode