Filter
Top Products
116
NO
TAPE!
• This message appears if you
hold down and press
or try to print a label or
feed the tape when no tape
cassette is installed.
• Install a tape cassette and try
again.
REPLACE
BATTERIES!
• This message appears if the
installed alkaline batteries
are about to run out.
• Replace the batteries or use
the AC adaptor.
ROM
PROBLEM!
• This message appears if there
is a problem with the
machine’s read only mem-
ory.
• Contact your service repre-
sentative.
SET 1” TAPE!
SET 24mm
TAPE!
• This message appears if a 1”
(24-mm)-wide tape cassette
is not installed when a layout
for 1” (24-mm)-wide tape is
selected.
• Install a 1” (24-mm)-wide
tape cassette.
SET 3/4”
TAPE!
SET 18mm
TAPE!
• This message appears if a
3/4” (18-mm)-wide tape cas-
sette is not installed when a
layout for 3/4” (18-mm)-wide
tape is selected.
• Install a 3/4” (18-mm)-wide
tape cassette.
SET 1/2”
TAPE!
SET 12mm
TAPE!
• This message appears if a
1/2” (12-mm)-wide tape cas-
sette is not installed when a
layout for 1/2” (12-mm)-wide
tape is selected.
• Install a 1/2” (12-mm)-wide
tape cassette.
SET 3/8”
TAPE!
SET 9mm
TAPE!
• This message appears if a
3/8” (9-mm)-wide tape cas-
sette is not installed when a
layout for 3/8” (9-mm)-wide
tape is selected.
• Install a 3/8” (9-mm)-wide
tape cassette.
Error Message Cause Solution
CodeCode
Length
T
Length
T