Loading documents and paper
11
2
How to load envelopes and postcards 2
a Before loading, press the corners and
sides of envelopes or post cards to
make them as flat as possible.
Note
If envelopes or post cards are ‘double-
feeding’, put one envelope in the paper
tray at a time.
b
Put envelopes or post cards into the
paper tray with the address side down
and the leading edge (top of the
envelopes) in first. With both hands,
gently press and slide the paper side
guides (1) and paper length guide (2) to
fit the size of the envelopes or post cards.
If you have problems when printing on
envelopes, try the following suggestions:
2
a Make sure the flap is either to the side of
the envelope or to the back edge of the
envelope when printing.
b Adjust the size and margin in your
application.
Removing small printouts
from the machine 2
When the machine ejects small paper onto
the output paper tray you may not be able to
reach it. Make sure printing has finished, and
then pull the tray completely out of the
machine.
2
1