Filter
Top Products
Troubleshooting and routine maintenance
101
C
Checking the remaining life of
parts C
You can see the remaining life of the
machine’s drum unit and periodic
maintenance parts on the LCD.
a Press Menu, 6, 7.
b Press a or b to choose 1.Drum,
2.Fuser, 3.Laser, 4.PF kit MP,
5.PF kit 1 or 6..PF Kit 2
1
.
Press OK.
1
PF Kit 2 appears only when the optional
LT-5300 tray is installed.
c Press Stop/Exit.
Reset C
The following reset functions are available:
1 Network
You can reset the print server back to its
default factory settings such as the
password and IP address information.
2 All Settings
You can reset all the machine settings
back to the settings that were set at the
factory.
Brother strongly recommends you use this
operation when you dispose of the
machine.
Note
Unplug the interface cable when you reset
All Settings.
How to reset C
a Press Menu, 1, 8.
b Press a or b to choose 1.Network or
2.All Settings.
Press OK.
c Press a or b to choose 1.Reset or
2.Exit.
Press OK.
d If you chose 1.Reset in step c , you
will be asked to reboot the machine.
Press a or b to choose 1.Yes or 2.No.
Press OK.
If you choose 1.Yes, the machine will
begin the Restart.
Note
You can also reset the Network settings
by pressing Menu, 5, 0.