Filter
Top Products
78
Packing and shipping
the machine B
CAUTION
If you pack the machine soon after turning
off the power make sure the machine has
cooled down completely.
When you transport the machine, use the
packing materials that came with your
machine. If you do not pack the machine
properly, you could void your warranty. The
machine should be adequately insured with
the carrier.
a Turn off the machine’s power switch.
b Unplug all the cables and AC power
cord from the machine.
c Open the front cover.
d Remove the drum unit and toner
cartridge assembly. Leave the toner
cartridge installed in the drum unit.
e Place the drum unit and toner cartridge
assembly into the plastic bag and seal
the bag.
f Close the front cover.
g Wrap the machine in the plastic bag and
place it in the original carton with the
original packing material.
h Pack the drum unit and toner cartridge
assembly, AC cord and printed
materials in the original carton as shown
below:
Note
If you are returning your machine to
Brother as part of the Exchange Service,
pack only the machine. Keep all separate
parts and printed materials to use with
your “Exchange” machine.
i Close the carton and tape it shut.