Brother FAX 1170 All in One Printer User Manual


 
62
CHAPTER EIGHT
Using Remote Retrieval Access Code
1
Dial your fax number from a touch tone phone.
2
When your fax machine answers and beeps, immediately enter your Remote
Retrieval Access Code (159).
3
Your fax machine signals the kinds of messages received:
1 long beep — Fax message(s)
No beeps — no messages.
4
Your fax machine then prompts you with two short beeps to enter a
command. If you wait longer than 30 seconds to enter a command, your
machine hangs up. If you enter an invalid command, your machine beeps
three times.
5
Press
9
0
to reset your machine when you finish.
6
Hang up.
Remote Commands
Follow the commands below to access features remotely. When you call the fax
machine and enter your Remote Retrieval Access Code (159), the system will
signal you with two short beeps to enter a remote command.
Change Paging/Fax Forwarding Setting
Press
9
5
.
then to
Turn feature off — Press
1
.
Enter Fax Forwarding — Press
2
.
Enter Paging — Press
3
.
Program Fax Forward Number — Press
4
, then retrieve Memory Status
List (see page 64).
Confirm Fax Forward Number — Press
5
.
Turn Fax Storage ON — Press
6
.
Turn Fax Storage OFF — Press
7
.