Filter
Top Products
SETUP RECEIVE
5 - 4
Easy Receive
When you use this feature, you don’t have to press Start when you answer a fax call
and hear calling beeps. Just hold the handset and wait a few seconds. When you see
RECEIVE on the fax screen or when you hear “chirps” through the handset of an
extension phone connected to another wall jack, just replace the handset, and your
machine does the rest. Selecting ON allows the FAX/MFC to receive fax calls
automatically, even if you lift the handset of an extension or external phone. Selecting
SEMI lets the machine receive the call only if you’ve answered it at the FAX/MFC.
Selecting OFF means you’ll have to activate the FAX/MFC yourself, by pressing
Start or by pressing 5 1 if you are not at your machine. (See Operation from
External or Extension Telephone, and For FAX/TEL Mode Only, page 5-6.)
If you’ve set the feature to ON, but your FAX/MFC doesn’t automatically connect a
fax call when you lift an external or extension phone handset, press the Fax Receive
code 5 1. At the FAX/MFC, lift the handset and press Start.
1
Press Function/Set, 2, 3.
2
Press or to select ON, SEMI or OFF and press Function/Set.
3
Press Stop to exit.