Filter
Top Products
63
Storing Numbers for Easy Dialing
You can set up your FAX/MFC to do three types of easy dialing: One Touch,
Speed Dial, and Groups for Broadcasting of faxes.
Storing One Touch Dial Numbers
You can store eight fax/phone numbers that you can dial by pressing one key.
You also can store names with these numbers. When you press a One Touch
dial location, the screen displays the name or number as the call is dialed.
One Touch keys are not the dial pad keys. They are the eight keys (numbers
01–08) located to the right of the dial pad.
1
Press
Function
,
6
,
1
.
2
Press the One Touch key where you want to store a number. (One Touch
key
1
is pre-programmed for Brother Fax-Back System, USA only. You
can override it if you wish.) The screen displays the location you selected.
3
Enter a number (up to 20 digits). If you want to enter a pause in the
dialing sequence (to wait for an “outside line,” for example), press
Redial/Pause
as you’re entering digits. Pressing
Redial/Pause
enters a
3.5-second pause when the number is dialed, and a dash appears on the
screen.
4
Press
Set
. The screen prompts you to enter a name for this number.
NAME:
5
Use the dial pad to enter the name (up to 15 characters). You can use the
chart on page 29 to help you enter letters—OR—Go to Step 6 to store
the number without a name.
7
CHAPTER SEVEN
Setup Auto Dial
Numbers
See
One Touch
Dialing
p. 68