Brother HL-5470DW Printer User Manual


 
84
General Information
3
Epson FX-850
(Continued)
Top Margin #.## Sets the top margin at a distance
from the top edge of the paper: 0.00,
0.33, 0.50, 1.00, 1.50 or 2.00 inches.
The default setting is 0.33 inches.
Bottom Margin #.## Sets the bottom margin at a distance
from the bottom edge of the paper:
0.00, 0.33, 0.50, 1.00, 1.50 or
2.00 inches. The default setting is
0.33 inches.
Lines ### Sets the number of lines on each
page from 5 to 128 lines. The default
setting is 62 lines (Letter).
IBM Proprinter Font No. I000 / ... / I059* / ... / I071 Sets the font number.
Font Pitch 0.44 / ... / 10.00* / ... /
99.99
Sets the font pitch.
Font Pitch menu will appear when
you choose I059 to I071 in
Font No. setting.
Font Point 4.00 / ... / 12.00* / ... /
999.75
Sets the font size.
Font Point menu will appear when
you choose I000 to I058 in
Font No. setting.
Character Set PC-8* / PC-8 D/N / ... Sets the symbol set or the character
set.
Table Print - Prints code table.
If Change Emulation appears on
the LCD, choose Auto(EPSON),
Auto(IBM) or HP LaserJet in
Emulation of the Print Menu.
(See page 81.)
Auto LF On / Off* ON: CR i CR+LF, OFF: CR i CR
Auto CR On / Off* ON: LF i LF+CR, FF i FF+CR, or
VT i VT+CR
OFF: LF i LF, FF i
FF, or VT i VT
Auto
Mask On / Off* Sets the top and bottom margins to
two-line each. When you set
Auto Mask to On, this setting
overrides the Top Margin and
Bottom Margin settings.
Left Margin ## Sets the left margin at column 0 to 70
columns at 1 cpi. The default setting
is 0 cpi.
Right Margin ## Sets the right margin at column 10 to
80 columns at 1 cpi. The default
setting is 80 cpi.
Print Menu (continued)
Submenu Menu Selections Options Descriptions
The factory settings are shown in Bold with an asterisk.