Brother HL-5470DW Printer User Manual


 
90
General Information
3
Reprinting documents 3
Reprinting the last job 3
You can reprint the data from the last print job without sending it from the computer again.
Note
The Reprint function is not available when Secure Function Lock 2.0 is On. (For more information about
Secure Function Lock 2.0 uu Network User's Guide: Secure Function Lock 2.0)
If the machine does not have enough memory to spool the print job, it will not print the document.
If you wait 30 seconds to continue the control panel operation, the LCD leaves the reprint setting
automatically.
For more information about the settings in the printer driver, see Advanced tab uu page 31.
After turning the power switch off, the last print job will be deleted.
How to reprint the last job 3
a Make sure that the Reprint setting is On by using the keys on the control panel to enter the
General Setup menu.
Note
If you print with the Windows
®
printer driver we have supplied with the machine, the settings for
Use Reprint in the printer driver will take priority over the settings made on the control panel. Check the
Use Reprint check box in the printer driver. (For more information, see Use Reprint uu page 36.)
b Press Go for about 4 seconds and release it.
c Make sure that the LCD shows Reprint: Print. Press OK.
d Press a or b to enter the number of copies you want. You can choose between 1 and 999 Copies.
e Press OK or Go.
Note
If you want to delete the last print job from the memory, do the following process instead of the step c and
the subsequent steps.
•Press a or b to choose Reprint: Delete. Press OK.
The LCD will show Deleted, and then the machine will return to Ready mode.