Filter
Top Products
89
General Information
3
1
### means a number within the range of 000 to 255. On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt
to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA
IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the 'Boot Method' of the machine is set to 'Static' you will need to manually
enter an IP address from the machine's control panel.
2
For HL-6180DW(T)
Reset Menu 3
Wi-Fi Direct
(Continued)
Status Info.
Status G/O Active(**) /
Client Active /
Not Connected / Off /
Wired LAN Active
** = the number of devices
You can see the current Wi-Fi
Direct™ network status.
Signal - You can see the current Wi-Fi
Direct™ network signal
strength.
When your machine acts as the
Group Owner, the LCD always
shows Strong.
Channel - Shows the channel in use when
the Status is
G/O Active(**) or
Client Active.
Speed - Shows the connecting speed
when the Status is
G/O Active(**) or
Client Active.
I/F Enable - On / Off* Enable or Disable the Wi-Fi
Direct™ connection.
Network Reset
Restores all network settings of the internal print server to the factory default.
Display Shows Description
Network Restores all network settings of the internal print server to the factory default.
Factory Reset Resets the machine and restores the printer settings (including command settings) to the
factory default settings.
The factory settings are shown in Bold with an asterisk.
Network Menu (continued)
Submenu 1 Submenu 2 Menu Selections Options Descriptions
The factory settings are shown in Bold with an asterisk.