Filter
Top Products
Driver and software
2 - 17
2
Automatic Emulation Selection
Note
This section is for HL-2070N.
This printer has an Automatic Emulation Selection feature. When the printer receives data from the computer,
it automatically chooses the emulation mode. This feature has been set at the factory to ON.
You can change the setting using Remote Printer Console or Web browser.
Note
For more information about Remote Printer Console, see the following section.
The printer can choose from the following combinations:
Remote Printer Console
Remote Printer Console is software to change many of the printer settings independently of your software
application. For example, you can change the settings for printer margin, sleep mode, character set and so
on. These settings are then remembered and used by the printer.
How to use and install the Remote Printer Console software
To use the Remote Printer Console software, follow the steps below.
For Windows
®
1
Insert the CD-ROM into your CD-ROM drive and close the opening screen when it appears.
2
Open Windows
®
Explore and select the CD-ROM drive.
3
Double-click the RPC folder.
4
Refer to the RPC_User’s_Guide.pdf for how to install and use the Remote Printer Console.
For Macintosh
®
1
Insert the CD-ROM into your CD-ROM drive. Double-click the HL2000 icon on the desktop.
2
Double-click the RPC folder.
3
Refer to the RPC_User’s_Guide.pdf for how to install and use the Remote Printer Console.
Setting 1 (default) Setting 2
HP LaserJet HP LaserJet
EPSON FX-850 IBM ProPrinter XL