Brother HL-7050 Series Printer User Manual


 
3 - 35 CONTROL PANEL
HL7050_US_UG_FM5.5
Set IP Address
Press the
+
or
-
button until the NETWORK mode
appears (and to display each setting shown below).
Press the Set button.
Press the Set button.
Press the + button.
Press the Set button.
The last digit in the first part of the number
is blinking.
Press the + or - button to increase or
decrease the number.
Press the Set button to go to the next
number.
Repeat this process until you have set your
IP address.
Press the Set button to complete the IP
address.
An asterisk appears at the end of the
display.
--MENU--
INFORMATION
--MENU--
NETWORK
NETWORK
TCP/IP
TCP/IP
TCP/IP ENABLE
TCP/IP
IP ADDRESS=
IP ADDRESS=
192.0.0.192 *
IP ADDRESS=
123.0.0.192
IP ADDRESS=
123.45.67.89
IP ADDRESS=
123.45.67.89 *