Filter
Top Products
A - 47
HL7050_US_UG_FM5.5
Bar code, expanded character, line block drawing and box
drawing offset in X-axis
n = 'xnnn' or 'Xnnn'
This parameter shows the offset from the left margin in the 'u'- or 'U'-
specified unit.
Bar code & expanded character offset in Y-axis
n = 'ynnn' or 'Ynnn'
This parameter shows the downward offset from the current print
position in the 'u'- or 'U'-specified unit.
Bar code, expanded character, line block drawing and box
drawing height
n = 'hnnn', 'Hnnn', 'dnnn', or 'Dnnn'
(1) EAN13, EAN8, UPC-A, ISBN (EAN13, EAN8, UPC-A),
ISBN (UPC-E): 22 mm
(2) UPC-E: 18 mm
(3) Others: 12 mm
Expanded characters → 2.2 mm (preset)
Line block drawing and box drawing →1 dot
This parameter shows the height of bar codes or expanded
characters as shown above. It can start with 'h', 'H', 'd', or 'D'. The
height of bar codes is shown in the 'u'- or 'U'-specified unit. The
factory setting of the bar code height (12 mm, 18 mm or 22 mm) is
determined by the bar code mode selected by 't' or 'T'.
Expanded character width, line block drawing and box drawing
n = 'wnnn' or 'Wnnn'
Expanded character→ 1.2 mm
Line block drawing and box drawing→ 1 dot
This parameter shows the width of expanded characters as shown
above.