Filter
Top Products
Chapter 2
18
Type and size of paper 2
The machine loads paper from the installed
standard paper tray or manual feed slot.
The name for the paper trays in the
printer driver in this Guide are as
follows:
2
Paper capacity of the paper trays 2
1
Folio size is 215.9 mm x 330.2 mm
Recommended paper specifications 2
The following paper specifications are suitable for this machine.
Use paper made for plain paper copying.
Use paper that is 75 to 90 g/m
2
.
Use long grain paper with a neutral Ph value, and a moisture content of approx. 5%.
This machine can use recycled paper that meets DIN 19309 specifications.
Tray and optional unit Name
Standard paper tray Tray 1
Manual feed slot Manual
Paper size Paper types No. of sheets
Paper Tray
(Tray 1)
A4, Letter, B5, Executive, A5,
A5 (Long Edge), A6, B6, Folio
1
,
Legal, 16K (195 mm x 270 mm),
16K (184 mm x 260 mm),
16K (197 mm x 273 mm)
Plain paper, Thin paper
and Recycled paper
up to 250 (80 g/m
2
)
Manual feed slot
(Manual)
Width: 76.2 to 216 mm
Length: 116 to 406.4 mm
Plain paper, Thin paper,
Thick paper,
Bond paper,
Recycled paper,
Envelopes and Labels
Single sheet
(80 g/m
2
)
Basis weight
75-90 g/m
2
Thickness 80-110 m
Roughness Higher than 20 sec.
Stiffness
90-150 cm
3
/100
Grain direction Long grain
Volume resistivity
10e
9
-10e
11
ohm
Surface resistivity
10e
9
-10e
12
ohm-cm
Filler
CaCO
3
(Neutral)
Ash content Below 23 wt%
Brightness Higher than 80%
Opacity Higher than 85%