Brother MFC-7360 All in One Printer User Manual


 
Chapter 2
20
Envelopes 2
Most envelopes designed for laser printers
will be suitable for your machine. However,
some envelopes may have feed and print-
quality problems because of the way they
have been made. A suitable envelope should
have edges with straight, well-creased folds
and the leading edge should not be thicker
than two sheets of paper. The envelope
should lie flat and not be of baggy or flimsy
construction. You should buy quality
envelopes from a supplier who understands
that you will be using the envelopes in a laser
machine.
Envelopes can be fed from the manual feed
slot one at a time. We recommend that you
print a test envelope to make sure the print
results are what you want before you print or
purchase a large quantity of envelopes.
Types of envelopes to avoid 2
IMPORTANT
DO NOT use envelopes:
that are damaged, curled, wrinkled or
an unusual shape
that are extremely shiny or textured
with clasps, staples, snaps or tie
strings
with self-adhesive closures
that are of a baggy construction
that are not sharply creased
that are embossed (have raised writing
on them)
that were previously printed by a laser
machine
that are pre-printed on the inside
that cannot be arranged neatly when
stacked
that are made of paper that weighs
more than the paper weight
specifications for the machine
with edges that are not straight or
consistently square
with windows, holes, cut-outs or
perforations
with glue on surface as shown in figure
below
with double flaps as shown in figure
below
with sealing flaps that are not folded
down when purchased
with sealing flaps as shown in figure
below
with each side folded as shown in
figure below