Filter
Top Products
8
Setting Up the Machine
MFC-8440 and MFC-8840D have similar control panel keys.
You should store your name and fax number to be
printed on all fax pages that you send.
1
Press the Menu key.
2
Press the key.
3
Press the key.
4
Enter your fax number (up to 20 digits) on
the dial pad, and then press the Set key.
5
Enter your telephone number (up to 20
digits) on the dial pad, and then press the
Set key.
(If your telephone number and fax number
are the same, enter the same number
again.)
6
Use the dial pad to enter your name (up to
20 characters), and then press the Set key.
7
Press the Stop/Exit key.
Set
Menu
Stop/ExitDial pad
8 Setting Your Station ID
03.Station ID
Fax:_
Enter & Set Key
03.Station ID
Fax:+44XXXXXXXX
Tel:_
Enter & Set Key
Press to enter “+” (plus) character.
03.Station ID
Fax:+44XXXXXXXX
Tel:+44XXXXXXXX
Name:_
Enter & Set Key
■ Refer to the following chart for entering
your name.
■ If you need to enter a character that is on
the same key as the previous character,
press to move the cursor to the right.
Press
key
One
time
Two
times
Three
times
Four
times
2 ABC2
3 DEF3
4 GH I 4
5 JKL5
6 MNO 6
7 PQRS
8 TUV8
9 WX Y Z
For more details, see “Setting the Station
ID” in Chapter 4 of the User's Guide.
If you want to repeat from step1, press the
Stop/Exit key.
Go to Next page to
install the driver
Step 1