Filter
Top Products
SETUP RECEIVE
5 - 4
Setting the Print Density
You can adjust print density, making your printed pages darker or lighter than
the original.
1
Press Menu, 2, 1, 5.
2
Press to make print lighter, or to
make print darker.
3
Press Stop/Exit .
Advanced Receiving Operations
Operation from Extension Telephone
If you answer a fax call on an extension phone (or on an external phone in the
EXT. jack), you can make your MFC take over by using the Fax Receive Code.
When you press the Fax Receive Code 5 1, the MFC starts to receive a fax.
(See
Easy Receive, page 5-3.)
If you answer a call at an extension or external phone, and no one is on the line,
assume you’re receiving a fax. At an extension phone, press 5 1, wait for fax
receiving tones (chirps), then hang up. At an external phone, press 5 1 and
wait for the phone to be disconnected (the LCD shows RECEIVING) before
you hang up. (Your caller will have to press Fax Start to send the fax.)
Changing the Fax Receive Code
The preset Fax Receive Code ( 5 1) may not work with some telephone
systems.
If you are always disconnected when accessing your external TAD remotely, try
changing the Fax Receive Code from 5 1 to # # #.
1
Press Menu, 2, 1, 3.
2
Press or to select ON (or OFF),
and then press Set.
3
If you want to, enter a new Fax Receive
Code, and then press Set.
4
Press Stop/Exit.
5.PRINT DENSITY
3.REMOTE CODE
REMOTE ACT.:ON?
FAX RECEIVE:*51