Filter
Top Products
6 - 11
SETUP SEND
The MFC starts scanning the original into memory. It will wait until the time
you have entered to send the fax.
Delayed Batch Transmission
Before sending the delayed faxes, your Brother MFC will economize by sorting
all the messages in memory by destination and scheduled time. All delayed
faxes scheduled at the same time to the same fax number will be sent as one
transmission.
1
Press Menu, 2, 2, 5.
2
Press or to select ON (or OFF),
and then press Set.
3
Press Stop/Exit to exit.
Setting Up for Polling Transmit
Polling Transmit is when you set up your MFC to wait with an original in the
ADF so another fax machine can retrieve it.
1
Place the original face up in the ADF, or face down on the scanner glass.
2
Press Menu, 2, 2, 7.
3
Press or to choose
ON (or OFF), and then press Set.
4
Press 1 if you want to select additional settings. The LCD returns to the SETUP
SEND menu—OR—Press 2 if you are finished choosing settings.
5
Press Fax Start and wait for the fax to be polled.
The number of pages you can scan into memory varies with the data they
contain.
Note
If you pressed 1 in Step 4, the original remains in the ADF until your MFC is
polled. If you must use your MFC before the polled transmit occurs, you must
cancel this job.
5.BATCH TX
7.POLLED TX