Brother MFC-420CN Printer User Manual


 
6 - 4 REMOTE FAX OPTIONS (MFC-420CN ONLY)
Turning off Remote Fax Options
If you set the Remote Fax Options to
Off
and there are faxes in your
MFC’s memory, the LCD will give you two options.
If you press
1
, all unprinted faxes will be printed and erased
before the setting turns off. If a backup copy has already been
printed it will not be printed again.
If you press
2
, the memory will not be erased and the setting will
be unchanged.
(See Printing a fax from the memory (MFC-420CN only) on page
4-5.)
Setting your Remote Access Code
The remote access code lets you access the Remote Retrieval
features when you are away from your MFC. Before you use the
remote access and retrieval features, you have to set up your own
code. The default code is inactive code (--- ).
1
Press
Menu/Set
,
2
,
5
,
2
.
2
Enter a three-digit code using
numbers
0
-
9
or .
Press
Menu/Set
. (The preset ‘ ’ cannot be changed.)
3
Press
Stop/Exit
.
Do not use the same digits that appear in your Fax Receive
Code (
51
) or Telephone Answer Code (
#51
).
(See Operation from extension telephones on page A-7.)
You can change your code at any time by entering a new one.
If you want to make your code inactive, press
Stop/Exit
in Step
2 to restore the inactive setting (--- ).
Remote Fax Opt
2.Remote Access