Brother FAX-2820, FAX-2910, FAX-2920, MFC-7220, MFC-7225N Fax Machine User Manual


 
Setup Send
3 - 12
3
Setting up Polled Transmit
Polled Transmit is when you set up your
machine to wait with a document so another
fax machine can call and retrieve it. Everyone
who is involved in Polling needs to set up their
machines for Polling.
Note
When someone polls your machine to
receive a fax, they pay for the call.
If you poll someone’s fax machine to
receive a fax, you pay for the call.
1
If it is not illuminated in green, press
(Fax).
2
Load your document.
3
Press Menu/Set, 2, 2, 6.
4
Press or to select On (or Off).
Press Menu/Set.
5
Press 1 to leave the paper document
waiting in the ADF.
OR
Press 2 to scan the document into the
memory.
Note
If you press 1 in Step 5, the document
remains in the ADF until your machine is
polled. If you must use your machine
before the polled transmission occurs, you
must first cancel this job.
If you press 2 in Step 5, the document will
be stored and can be retrieved from any
other fax machine until you delete the fax
in memory by using the Canceling a Job
menu setting. (See Canceling a
scheduled job on page 3-8.)
6.Polled TX
1.Doc 2.Memory