Filter
Top Products
Important information
10 - 3
10
Disconnect device
This product must be installed near an AC power
outlet that is easily accessible. In case of
emergencies, you must disconnect the power cord
from the AC power outlet to shut off power
completely.
LAN connection
(MFC-7225N only)
Laser safety
This equipment is certified as a Class 1 laser
product under the U.S. Department of Health and
Human Services (DHHS) Radiation Performance
Standard according to the Radiation Control for
Health and Safety Act of 1968. This means that the
equipment does not produce hazardous laser
radiation.
Since radiation emitted inside the equipment is
completely confined within protective housings
and external covers, the laser beam cannot
escape from the machine during any phase of user
operation.
FDA regulations
U.S. Food and Drug Administration (FDA) has
implemented regulations for laser products
manufactured on and after August 2, 1976.
Compliance is mandatory for products marketed in
the United States. The following label on the back
of the machine indicates compliance with the FDA
regulations and must be attached to laser products
marketed in the United States.
CAUTION
Do not connect this product to a LAN
connection that is subject to over-voltages.
Manufactured:
BROTHER TECHNOLOGY (SHENZHEN) LTD.
NO6 Gold Garden Ind., Nanling Buji,
Rong Gang, Shenzhen, China
This product complies with FDA performance
standards for laser products except for
deviations pursuant to Laser Notice No. 50,
dated July 26, 2001.
WARNING
Use of controls, adjustments or performance of
procedures other than those specified in this
manual may result in hazardous invisible
radiation exposure.
Internal laser radiation
Max. Radiation Power 5 mW
Wave Length 770 - 810 nm
Laser Class Class 3B