Filter
Top Products
17 - 15
TROUBLESHOOTING AND ROUTINE MAINTENANCE
Machine Connect Failure or Bi-Directional
Communication Error
Recently, some printers have included a function that shows the printer
status on the PC display. Such printers use the bi-directional
communication parallel port between the printer and the PC. Our
machines have a bi-directional parallel port function. Since Windows
®
3.1x does not support bi-directional communication on the parallel port,
each peripheral vendor has developed and supplied a bi-directional device
driver, which will be installed into Windows
®
3.1x. If you install two or
more different bi-directional device drivers into Windows
®
, they may
conflict with each other and cause problems.
Please make sure you have installed the Brother printer driver, by
executing SETUP.EXE from your CD-ROM drive, following the
instructions on the CD-ROM label. The bi-directional communication may
be disabled when the driver is installed from the Add menu in “Printers”
of the Control Panel. Please restart Windows
®
.
Remove the conflicting situation caused by one of the following printer
drivers. Review the following sections that apply to any additional printer
drivers you may have installed into your Windows
®
software.
Brother HL-6/6V/10h/630series/660series/960/1260/WL-660
HP LaserJet series II, IID, IIP, IIP+, III, IIID, IIIP or IV Plus
NEC SuperScript 610/660
EPSON ActionLaser 1100/1400
LexMark WinWriter 200
Brother HL-6/6V/10h/630series/660series/960/1260/
WL-660:
The Resource Manager for your machine’s Brother printer drivers may not
work if the printer drivers for the above laser printers models are installed
after the installation of the Brother printer drivers.
In this case, please install the Brother printer drivers again or copy
BI-DI.386 from the CD-ROM to the Windows/System directory.
(NOTE: BI-DI.386 on the CD-ROM is not compressed.)
EPSON ActionLaser 1100 / 1400:
Please remove the EPSON Action Laser 1100/1400 driver by running the
EPDELETE.EXE file in the Windows
®
Printer Driver for these models.