Brother MFC 8300 Fax Machine User Manual


 
SETUP RECEIVE
5 - 7
Advanced Receiving Operations
Operation from Extension Telephone (For FAX 4750, MFC
8300, MFC 8600 and MFC 8700 only) or External Telephone
If you answer a fax call on an extension phone (or on an external phone in
the EXT. jack), you can make your machine take over by using the Fax
Receive Code. When you press the Fax Receive Code
5
1
, the
machine starts to receive a fax. (See Setting Ring Delay, page 5-2 and
Easy Receive, page 5-3.)
If the machine answers a voice call and double-rings for you to take over,
use the Telephone Answer Code
5
1
to take the call at an extension
phone.
If you answer a call, and no one is on the line, assume you’re receiving a
fax. At the machine’s phone, press
Start
, then hang up. At an extension
phone, press
5
1
, wait for fax receiving tones (chirps), then hang up.
At an external phone, press
5
1
and wait for the phone to be
disconnected (the screen displays RECEIVING) before you hang up.
(Your caller will have to press
Start
to send the fax.)
For the FAX 5750, the Fax Receive Code and Telephone Answer Code can
be used only from an external phone.
For FAX/TEL Mode Only
When the machine is in FAX/TEL mode, it will use the F/T Ring Time
(double-ringing) to alert you to pick up a voice call. If you’re at the
machine, you can lift the handset to answer.
If you’re at an extension phone, you’ll need to lift the handset during the
F/T Ring Time and press
5
1
between the double rings. If no one is
on the line, or if someone wants to send you a fax, send the call back to
the machine by pressing
5
1
.
Changing Remote Codes
Remote Codes might not work with some telephone systems. The preset
Fax Receive Code is
5
1
. The preset Telephone Answer Code is
5
1
.
If you are always disconnected when accessing your external TAD
remotely, try changing the Fax Receive Code from
5
1
to
and the Telephone Answer Code from
5
1
to
9
9
9
.